DIY Cleaning Guides / Video guide

How to Clean Your Dishwasher and Filter

47 seconds · On-screen instructions · Full steps below

Rinse the filter, check spray arms and run a machine-care cycle when your model calls for one.

Step by step

  1. Switch off and empty

    Let the dishwasher cool. Slide out the lower rack to reach the filter at the base.

  2. Rinse the filter

    Unlock the filter as your manual shows. Rinse away trapped food under running water, using a soft brush if needed.

  3. Check the spray arms

    If the manual shows how to remove the arms, rinse them and clear visible debris without widening the holes. Refit them and check they spin freely.

  4. Wipe and lock back in

    Wipe the door edges and seal with a soft damp cloth. Refit the filter fully and lock it in place before using the machine.

  5. Run a care cycle when due

    Empty the machine and use a cleaner and cycle approved for your model. Follow the pack directions. Dishwasher tablets are for washing dishes.

How often to clean

Check your manual. Bosch Australia suggests cleaning the filter monthly and checking spray arms periodically. Its intensive Machine Cleaner is recommended every 4–6 months on suitable models.

When to get help. Get appliance service if a leak, electrical issue or drainage fault persists after routine care.

What to use

Sources and manufacturer instructions

Your consumer rights. Australian Consumer Law applies. Our promises do not limit your rights or remedies.

ACCC pricing ↗Consumer guarantees ↗Privacy